Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Hood Latch on a Mercedes-Benz C-Class W204

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Body

In this video, you will see how to disassemble and replace the hood latch on a Mercedes-Benz C-Class W204. First, open the hood of your car and locate the position of the hood latch; then unscrew the mounting screws using a socket wrench. At this point, lift the mechanism and disconnect the cable from it to remove it, as shown in the video; all that’s left is to replace it with the new one and reassemble everything by applying the reverse procedure of disassembly!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Mercedes C-Class W204 located?
Where is the fuse box of the Mercedes C-Class W204 located?
Mercedes Classe C (2007-2013 / W204) .. box containing all the fuses of your Mercedes C-Class W204. First of all, you need to raise the front hood of the car in order to have access to the.. …
How to Replace the Emblem on a Mercedes C-Class W204
How to Replace the Emblem on a Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. emblem located on the hood of your Mercedes C-Class W204 (2007-2013), follow these simple steps. First, park the car safely on a flat surface and turn.. …
How to Open a Stuck Fuel Door on a Mercedes-Benz C-Class
How to Open a Stuck Fuel Door on a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. How to open a stuck fuel door on a Mercedes-Benz C-Class? Let's see how to address the issue. Open the trunk, remove the side trim (fabric or plastic);.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos