Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Removing the interior fan on the Mercedes C-Class W204

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Interior blower
Operation: Removing the interior fan on the Mercedes C-Class W204

Let's find out in this guide the procedure necessary for the disassembly and replacement of the passenger compartment fan on the Mercedes Benz C-Class W204, in simple steps. First we access the front passenger compartment and start by removing the lower bulkhead that we find under the glovebox, unscrewing the screws; after which we disconnect the electrical connector of the light bulb. At this point we disconnect the electric cable of the fan and detach it from its seat, as shown in the video; we just have to replace it with the new one, of the right type!


Posted on 9 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - Why is the cooling fan of the Mercedes C-Class W203 not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos