Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Speaker from Mercedes E-Class W212

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Speaker

See other generations:
Video tutorial

In today's tutorial, you will learn how to remove the speaker from a Mercedes E-Class W212. First, open the door and remove the door panel using a plastic tool to take off all the plastics located on the panel; then, unscrew all the screws underneath and detach the panel, as shown in the video.

Next, disconnect the door handle cable and the electrical connector; this gives you access to the speaker where you will drill out the rivets with a drill bit: once done, remove the speaker and replace it with the new one!


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Removing and Reinstalling the Headliner on a Mercedes E-Class W212
Removing and Reinstalling the Headliner on a Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. and reinstall the headliner on a Mercedes E-Class W212. First, get inside the car and remove the side plastic pillars; then, unscrew the mounting.. …
Where is the fuse box of the Mercedes E-Class W212 located?
Mercedes Classe E (2009-2016 / W212) .. locate the fuse box inside your Mercedes E-Class W212. First, you need to reach the rear area of the car, then fully lift the hood and shift your.. …
Where to Find the Fuse Box in the Mercedes E-Class W212
Where to Find the Fuse Box in the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. where the fuse box is located in your Mercedes E-Class W212 (2009-2016), don't worry because this mini guide provides all the necessary information. First,.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos