Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Turn Signal Switch Replacement on Mercedes E-Class 320 W211

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009

See other generations:
Video tutorial

In this short video tutorial, we will see instructions on how to remove the turn signal switch from a Mercedes E-Class 320 W211, third series. First, get inside the vehicle and remove the plastic trim around the turn signal switch by prying it with something thin; then unscrew the T25 torx screws located underneath.

At this point, pry the turn signal switch to remove it, as shown in the video; all that’s left is to disconnect its electrical connector located at the back to remove it completely. Apply the reverse procedure for reassembly!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Remove the Interior Light Fixture on a Mercedes E-Class W211
How to Remove the Interior Light Fixture on a Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) In this video tutorial, you will learn how to remove the interior light fixture on a Mercedes Benz E-Class W211, fourth generation. First, get inside…
How to replace the front headlight bulb of the Mercedes E-Class W211
How to replace the front headlight bulb of the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) Replacing the front turn signal bulb of your Mercedes E-Class W211 is really simple and to complete the operation correctly, you just need to follow …
Where is the OBD2 port located on the Mercedes E-Class W211?
Where is the OBD2 port located on the Mercedes E-Class W211?
Mercedes Classe E (2002-2009 / W211) If you want to independently locate the OBD2 port inside your Mercedes E-Class W211, just read the following guide carefully and follow the steps des…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos