Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the Mercedes A-Class A180 W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

This guide shows how to replace the cabin air filter in the Mercedes Benz A-Class A180 W176. Perform this operation from inside the cabin in the passenger footwell. Slide the passenger seat back and remove the mat to access the panel under the glove compartment.

In this space is the air filter housing. Disconnect the two clips securing the cover, then remove the filter element using a small hook.

Insert the new filter and close the cover. Clean the bottom of the compartment of any debris and secure the panel back in place.

Reinstall the mat. The operation is complete.


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Identify the Radiator Thermostat of a Mercedes Benz A180 W176
How to Identify the Radiator Thermostat of a Mercedes Benz A180 W176
Mercedes Classe A (2012-2018 / W176) This guide shows how to locate the position of the radiator thermostat of the Mercedes Benz A180 W176. This component regulates the flow of coolant i…
Reset Tire Pressure Light on Mercedes A180
Reset Tire Pressure Light on Mercedes A180
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to reset the Tire Pressure Monitoring System (TPMS) light on a Mercedes A180, third generation. Before per…
Replacing the Cabin Air Filter in the Mercedes-Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) In this video, you will learn how to replace the cabin air filter in the Mercedes-Benz A-Class W176. Start by removing the passenger side floor mat, …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos