Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Brake Light Bulb in a Mercedes A-Class?

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you can see how to replace a brake light bulb in a Mercedes A-Class W176. First, remove the side panel of the trunk, unscrew the large white plastic screw, and pull the rear light assembly out of its housing, disconnecting the connector.

Now that you have the light removed, locate and unscrew the 3 plastic bolts on the back, and at this point, you can pull out the bulb holder.

Replace the faulty bulb, in this case, the brake light, and reassemble everything by following the reverse procedure.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How to Disable the Start&Stop System in the Mercedes A-Class
How to Disable the Start&Stop System in the Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. disable the Start&Stop system in the Mercedes A-Class. First, get in the vehicle and start the engine; the Start&Stop system is always activated on the.. …
How to Replace the Mirror Bulb on the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To replace the mirror bulb on the Mercedes A-Class, use a flathead screwdriver to pry at the back of the cover and just below the mirror. This will.. …
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. the exterior rearview mirror of the Mercedes A-Class. First, let's move to the side and start removing the plastic cover of the exterior rearview mirror;.. …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos