Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Bulb on the Mercedes A-Class?

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Light bulb

See other generations:
This video is currently unavailable

To replace the mirror bulb on the Mercedes A-Class, use a flathead screwdriver to pry at the back of the cover and just below the mirror. This will allow you to remove both the cover and subsequently the mirror.

By unscrewing the corresponding screws, you can remove the lower support of the mirror, which contains the bulb. This bulb should be extracted from its housing and disconnected from the respective connector.

At this point, the new bulb can be connected to the connector and inserted into the designated housing.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Mirror Light Bulb on a Mercedes A-Class?
How to Replace the Mirror Light Bulb on a Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the mirror light bulb on a Mercedes A-Class, use a tool like a screwdriver to pry the mirror away from the inside of the housing. Underneath,.. …
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. the exterior rearview mirror of the Mercedes A-Class. First, let's move to the side and start removing the plastic cover of the exterior rearview mirror;.. …
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Mercedes Classe A (2018-2026 / W177) .. in the external side mirror of the Mercedes A-Class. First, remove the plastic cover of the mirror by prying it off with something thin. Then, remove.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos