Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Mirror Light Bulb on a Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

To replace the mirror light bulb on a Mercedes A-Class, use a tool like a screwdriver to pry the mirror away from the inside of the housing. Underneath, there will be retaining clips that need to be released to remove the housing itself.

Once the housing is removed, disconnect the connector for the light located on the mirror and pull out the bulb, replacing it with a new one. After removing the old bulb, reinstall all the other parts of the mirror that were previously removed.


Updated on 5 June 2026 by ScegliAuto


Related tutorials

How to Replace the Mirror Bulb on the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To replace the mirror bulb on the Mercedes A-Class, use a flathead screwdriver to pry at the back of the cover and just below the mirror. This will.. …
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
How to replace the turn signal bulb in the mirror of the Mercedes A-Class.
Mercedes Classe A (2004-2012 / W169) .. the exterior rearview mirror of the Mercedes A-Class. First, let's move to the side and start removing the plastic cover of the exterior rearview mirror;.. …
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Disassembly and Replacement of the Turn Signal in the Mercedes A-Class Side Mirror
Mercedes Classe A (2018-2026 / W177) .. in the external side mirror of the Mercedes A-Class. First, remove the plastic cover of the mirror by prying it off with something thin. Then, remove.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos