Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Low Beam on Mercedes C-Class

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Headlight

Lift the hood and insert the prop rod. For safety, disconnect the battery. Manually unscrew the cover located at the bottom of the headlight, as shown in the video. Remove the connector with the bulb, then take out the bulb from the holder and replace it with the new one you purchased. Insert the connector and the bulb correctly into their designated position inside the headlight, just like the old bulb was installed. Manually screw the lower cover of the headlight back on, close the hood, and reconnect the battery. Check that the bulb works by starting the car.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Low Beam Bulb on a Mercedes-Benz C-Class
Replacing the Low Beam Bulb on a Mercedes-Benz C-Class
Mercedes Classe C (2007-2013 / W204) .. of the front headlight on the Mercedes-Benz C-Class. First, open the hood of the vehicle and start by removing the plastic cover protecting the bulbs.. …
How to replace the front headlight bulb of the Mercedes C-Class
How to replace the front headlight bulb of the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. bulb of the front headlight of the Mercedes C-Class. First, we open the hood of the car and start removing the rear protective cover of the headlight;.. …
How to replace the front headlight bulbs of the Mercedes C-Class
How to replace the front headlight bulbs of the Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. bulb of the front headlight of the Mercedes C-Class. First, lift the vehicle and remove the front wheel to have better access to the wheel well, where.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos