Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulb on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

Before you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the inner cover of the burnt-out bulb.

Next, rotate the base of the burnt-out bulb counterclockwise to remove it from the headlight assembly. At this point, disconnect the electrical connector.

Once you have disconnected the connector, you will have completed the disassembly. To install the new bulb, simply reverse this procedure, and you will have finished the replacement.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2007-2013 / W204) .. you begin, open the hood of your Mercedes C-Class. Start by unscrewing and removing the rear cover of the bulb. Next, disconnect the electrical connector,.. …
Mercedes Classe C (2007-2013 / W204) .. the headlight bulb on a 2012 Mercedes-Benz C-Class is simple and quick to do yourself. To replace the bulb, remove the screws located on the headlight.. …
Mercedes Classe C (2007-2013 / W204) .. the front fog light bulb on the Mercedes C-Class. First, move to the front of the vehicle and start by removing the side cover of the fog light;.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos