Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery for the Mercedes GLK

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Key

Video tutorial

In this short and simple guide, you will see the main steps to disassemble and replace the battery in the key fob for the Mercedes GLK, following the instructions below. First, take your key fob and remove the physical key from inside it by sliding the button; then remove the battery tray to replace the battery with a new one (in this case, a 2025 3V battery).

At this point, insert the battery in the correct orientation and reassemble the tray onto the key fob!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Mercedes GLK Key Remote
How to Replace the Battery in a Mercedes GLK Key Remote
Mercedes Glk (2008-2015 / MK 1) Have you tried to open your Mercedes with the remote, but unfortunately, it did not respond? It probably showed signs of a dying battery, but you did…
How to Open the Remote for the Mercedes GLK
How to Open the Remote for the Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) In this tutorial, see how to open the remote for the Mercedes GLK, useful if you need to replace a flat battery. You won't need any special tools. Fi…
How to Change Oil on a Mercedes Glk
How to Change Oil on a Mercedes Glk
Mercedes Glk (2008-2015 / MK 1) How to change the engine oil on a Mercedes Glk? Let's look at the oil and filter change. Open the car door and pull up the engine compartment release…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos