Do it yourself
Frequently asked questions about cars and motorcycles

Service Reset on a Mercedes Sprinter

Model: Mercedes Sprinter MK 3, Br910, Br907 - Years 2018-2026
Part: Warning light – error code

Get in the vehicle and turn on the ignition (but do not start the engine!). Using the buttons located under the speedometer/instrument cluster, scroll through the various sections of the menu, as shown in the video. Navigate to the "ASSYST PLUS" section. Once in, select the service and reset it using the "ok" button. Turn off the ignition and turn it back on as a final check. Note that this operation should only be performed after actually carrying out the service and not as a substitute for it, to avoid serious damage to the engine or other parts of the vehicle. Good luck and see you next time!

Updated on 20 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) After performing the operations related to the car service, it is necessary to proceed with resetting the service light. Resetting a Mercedes Sprinte…
Mercedes Sprinter (2006-2018 / MK 2, W906) In this brief guide, you will learn how to reset the service light and maintenance of the Mercedes Sprinter. First, get inside the vehicle and turn o…
Mercedes Sprinter (2018-2026 / MK 3, Br910, Br907) Today's guide will show you the procedure to reset the maintenance reminder (service) on the Mercedes Sprinter. First, get into the vehicle and turn …

Other guides you may be interested in

    Frequently Asked Questions

    • Sprinter 2006-2018 - What does the "EDC" light on the Mercedes Benz Sprinter Mk2 mean? Read answer
    • Sprinter 2006-2018 - What are the warning lights of the Mercedes Sprinter? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos