Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Temperature Sensor on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Checks and maintenance

The outside temperature sensor on the Mercedes C-Class is located just behind the grille. To access it, you need to reach the bottom of the front bumper by removing the screws that secure the plate there. Once this plate is removed, you can access the sensor, which must be disconnected from its connector and removed from its housing. Then, connect the new sensor to the connector, secure it in its housing, and reinstall the plate at the bottom of the vehicle.

Updated on 24 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
How to Replace the Outside Temperature Sensor on a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) .. the outside temperature sensor on a Mercedes C-Class, open the hood and loosen the bolts that secure the grille at the front of the engine compartment... …
Cleaning the Cabin Temperature Sensor
Cleaning the Cabin Temperature Sensor
Mercedes Classe C (1983-1993 / ) Depending on the internal cabin temperature and the external temperature, the air conditioning system regulates the temperature of the cooled air: it…
Replacement of the internal air temperature sensor of the Mercedes C-Class
Replacement of the internal air temperature sensor of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. on the front passenger side, of the Mercedes C-Class. First, we open the front door of the car and start removing the plastic cover found under the.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos