Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Nozzle on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield washer nozzle

See other generations:
Video tutorial

To replace the windshield washer nozzle on a Mercedes C-Class, open the hood to access the engine compartment and remove the cover of the wiper arm. Then, loosen all the nuts that secure the central pins of the wiper arms and remove them completely.

This will allow you to unscrew the bolts that hold the plastic grille at the base of the windshield.

The windshield washer nozzle will be located inside and can be pulled out of its housing and disconnected from the appropriate cables. Once the old part is removed, you can replace it with a new replacement part.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

Replacing the Windshield Washer Pump on the Mercedes C-Class
Replacing the Windshield Washer Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front tire; then remove the wheel well liner by unscrewing.. …
Windshield Washer Fluid Replacement on Mercedes C-Class
Windshield Washer Fluid Replacement on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) .. off the windshield washer fluid on a Mercedes C-Class. Pull the plastic lever located at the bottom left of the dashboard, lift the hood, and secure.. …
How to Activate the Headlight Washer System on Mercedes C-Class
How to Activate the Headlight Washer System on Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the headlight washer system on the Mercedes C-Class. First, get in the vehicle and turn on the instrument cluster. To activate the headlight washer.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos