Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windshield Washer Pump on the Mercedes C-Class

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

Follow these instructions to remove and replace the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front tire; then remove the wheel well liner by unscrewing the fastening screws.

At this point, disconnect the washer fluid pump hose, allowing any excess fluid to drain; then disconnect the electrical connector and remove the windshield washer pump, replacing it with the new original one. Reconnect the electrical connector and pour in the new washer fluid, then test its operation!


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Replacing Windshield Washer Pump on Mercedes C-Class
Replacing Windshield Washer Pump on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. the windshield washer pump on a Mercedes-Benz C-Class. First, lift the vehicle with a jack from the front left side and remove the front wheel by unscrewing.. …
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. the windshield washer pump on a Mercedes C-Class, a very simple and quick operation. As shown, the pump is located inside the left front wheel well,.. …
Replacing the Fuel Pump Assembly on a Mercedes-Benz C-Class
Replacing the Fuel Pump Assembly on a Mercedes-Benz C-Class
Mercedes Classe C (2000-2007 / W203) .. the fuel pump assembly on a Mercedes-Benz C-Class. First, access the rear of the vehicle and remove the rear seat; then remove the upper cover to.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos