Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Washer Pump on a Mercedes C-Class?

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Pump

In this tutorial, you will see how to replace the windshield washer pump on a Mercedes C-Class, a very simple and quick operation. As shown, the pump is located inside the left front wheel well, so first, lift that side with a jack, taking the necessary safety measures, and remove the wheel. Once that is done, remove the front panel by unscrewing the 4 mounting screws, grasp the pump by the two upper clips, and separate it from the reservoir. Once the replacement is connected, simply follow the reverse procedure.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Windshield Washer Pump on the Mercedes C-Class
Replacing the Windshield Washer Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front tire; then remove the wheel well liner by unscrewing.. …
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. washer reservoir and pump on the Mercedes Benz C-Class W204. First, open the hood of your car and remove the pump support by loosening the mounting screw.. …
Replacing Windshield Washer Pump on Mercedes C-Class
Replacing Windshield Washer Pump on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. the windshield washer pump on a Mercedes-Benz C-Class. First, lift the vehicle with a jack from the front left side and remove the front wheel by unscrewing.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos