Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

This guide provides the main instructions for removing and replacing the windshield washer reservoir and pump on the Mercedes Benz C-Class W204. First, open the hood of your car and remove the pump support by loosening the mounting screw with a 10 mm wrench.

Next, remove the lower right panel located under the vehicle, along with the fender on the same side.

At this point, disconnect the hoses from the reservoir and pump, and unplug the power connector. Finally, unscrew the screws to remove the reservoir, following the video until the end!


Updated on 23 April 2026 by ScegliAuto


Related tutorials

Replacing the Windshield Washer Pump on the Mercedes C-Class
Replacing the Windshield Washer Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) Follow these instructions to remove and replace the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front…
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) In this tutorial, you will see how to replace the windshield washer pump on a Mercedes C-Class, a very simple and quick operation. As shown, the pump…
Windshield Washer Fluid Replacement on Mercedes C-Class
Windshield Washer Fluid Replacement on Mercedes C-Class
Mercedes Classe C (2014-2021 / W205) Learn how to top off the windshield washer fluid on a Mercedes C-Class. Pull the plastic lever located at the bottom left of the dashboard, lift the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos