Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Windshield Washer Pump on Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Pump

See other generations:
Video tutorial

Today, in this guide video, you will learn how to remove and replace the windshield washer pump on a Mercedes-Benz C-Class. First, lift the vehicle with a jack from the front left side and remove the front wheel by unscrewing its bolts.

At this point, remove the front fender by unscrewing the screws and removing the clips. Use something sharp to disconnect the electrical connector from the pump.

Then, disconnect the hose to drain all the fluid and subsequently remove the pump, replacing it with the new one. Follow the video to the end to understand the reassembly steps!


Updated on 31 March 2026 by ScegliAuto


Related tutorials

Replacing the Windshield Washer Pump on the Mercedes C-Class
Replacing the Windshield Washer Pump on the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the windshield washer pump on the Mercedes C-Class. First, lift the vehicle and remove the left front tire; then remove the wheel well liner by unscrewing.. …
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
How to Replace the Windshield Washer Pump on a Mercedes C-Class?
Mercedes Classe C (2000-2007 / W203) .. the windshield washer pump on a Mercedes C-Class, a very simple and quick operation. As shown, the pump is located inside the left front wheel well,.. …
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Replacing the Windshield Washer Reservoir and Pump on the Mercedes C-Class W204
Mercedes Classe C (2007-2013 / W204) .. washer reservoir and pump on the Mercedes Benz C-Class W204. First, open the hood of your car and remove the pump support by loosening the mounting screw.. …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos