Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Front Bumper of the Mercedes ML - GL

Model: Mercedes Gl X164, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Front bumper

See other generations:
Video tutorial

In this guide, follow the main instructions to remove and replace the front bumper of the Mercedes ML, as well as the GL. First, open the bonnet of your car and start removing all the clips and screws found on both the upper and lower parts of the bumper; perform the same procedure to unscrew the additional screws on the front wheel arches, as shown in the video.

At this point, begin detaching the bumper from the sides to remove it completely; replace it, if necessary, with the new one and apply the reverse procedure for reassembly!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Mercedes Gl (2006-2012 / X164, MK 1) Today's main instructions will allow us to disassemble and replace the rear bumper of the Mercedes GL. First, we open the rear trunk door and start u…
Mercedes Gl (2006-2012 / X164, MK 1) In this brief guide, you will find instructions to dismantle and replace the front fog light bulbs on the Mercedes GL. First, move to the front of th…
Mercedes Gl (2006-2012 / X164, MK 1) In this tutorial, we can see how to replace the front headlight bulbs in the Mercedes GL, an extremely simple and quick operation. First of all, make…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos