Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Mercedes E-Class

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Fuel pump

If you need to replace the fuel pump on this German vehicle model, you will find the information and instructions below and in the tutorial video. To access the area where the fuel filter is located, remove the rear seat and then take off the soundproofing cover underneath. Next, remove the protective cap and disconnect the fuel lines and the connector, then unscrew the ring. At this point, you can extract the pump and replace it.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the Mercedes E-Class W211
How to Replace the Fuel Pump on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. and replace the fuel pump on the Mercedes E-Class W211 in simple steps. First, open the rear doors and start by removing the rear seat; then, remove.. …
Replacing the Fuel Pump on the Mercedes E-Class
Replacing the Fuel Pump on the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replacing the fuel pump on the Mercedes E-Class. First, open the rear doors of the vehicle and start removing the rear seat to access the fuel.. …
How to replace the fuel pump fuse of the Mercedes E-Class
How to replace the fuel pump fuse of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. and replace the fuel pump fuse of the Mercedes E-Class. First, we need to locate the fuel pump fuse, which we can find by removing the carpeted cover.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos