Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the fuel pump on the Mercedes E-Class W211

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Fuel pump

In this video tutorial we will see how to disassemble and replace the fuel pump on the Mercedes E-Class W211, in simple steps. First we open the rear doors and start by removing the sofa; then we are going to remove the fuel pump cover by unscrewing the fixing screws that we find on the sides. At this point we disconnect the electrical connector and the petrol pipes; we then extract the floating pump, replacing it with the new one. This car is equipped with two fuel pumps; It is therefore advisable to check which of the two is actually faulty before replacing it.


Posted on 5 March 2024 by ScegliAuto



How to replace the fuel pump fuse of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) Today's instructions will show us how to locate and replace the fuel pump fuse of the Mercedes E-Class. First, we need to locate the fuel pump fuse,
How to replace the power steering pump on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. the power steering pump on the Mercedes Benz E-Class W211, following the instructions below. First of all we open the bonnet of our car and start by..
How to replace fuel pump in Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) Replacing the fuel pump on your Mercedes E-Class is very simple, let's see how to proceed in this tutorial. The first thing you need to do is remove

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos