Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windshield Wiper Blades on a Mercedes A-Class?

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Windshield wipers

See other generations:
This video is currently unavailable

To replace the windshield wiper blades on a Mercedes A-Class, lift the wipers so they do not touch the windshield. This allows you to angle the wipers perpendicular to the arms.

By acting on the pivot joint between the wipers and the arms, you can open the clips that hold them and remove the old blades. At this point, you can install the new blades by attaching them to the arms and positioning them on the windshield.

After installation, check that they operate correctly.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Wipers on the Mercedes A-Class
How to Replace the Front Wipers on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the front wipers on the Mercedes A-Class. First, move to the front of your car and lift the wiper arm; then rotate it and pull it backward.. …
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. the windshield wiper blades on a Mercedes A-Class, lift the arm connected to the wiper motor to detach the blades from the windshield. To remove.. …
Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. rear wiper, on the third generation Mercedes A-Class (W176). First, lift the front wiper arm; then press and lift the wiper lock tab, sliding it off.. …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos