Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Hood on a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Body

Video tutorial
Detailed instructions - As you can see in this tutorial, removing the hood on a Mercedes C-Class is an extremely simple and quick operation. It is recommended to have a second person assist you. Start by fully opening the hood, then using a flathead screwdriver, detach the upper hinge of both support struts. While holding the hood up, next, remove the three bolts on each side that secure the hinges with a 10mm socket wrench. At this point, you can lift it off the supports and install the replacement by following the reverse procedure.

Updated on 23 June 2026 by ScegliAuto


Related tutorials

How to disassemble the windshield wiper motor of the Mercedes C-Class
How to disassemble the windshield wiper motor of the Mercedes C-Class
Mercedes Classe C (1993-2000 / W202) .. front windshield wiper motor of the Mercedes C-Class. First, we open the hood of the car and start to disassemble and remove the plastic cover underneath.. …
How to Open the Hood on a Mercedes C-Class
How to Open the Hood on a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. Let's see how to open the hood on a Mercedes C-Class. Open the driver’s door and pull the lever located at the bottom left of the dashboard. Then, l.. …
How to open the hood of the Mercedes C-Class
How to open the hood of the Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. will see how to open the hood of the Mercedes C-Class, in simple steps. First, open the front door of the car, on the driver's side, and start pulling.. …

How to Adjust the Handbrake on a BMW 1 Series?

To adjust the handbrake on a BMW 1 Series, use a tool to pry off the leather cover that wraps around the base of the handbrake lever. Once this cover is removed, you will be able to locate the spring that regulates the handbrake tension. At this point, adjust the nut located at the base of the spring: tightening the nut will make the handbrake firmer and reduce the lever's travel. Conversely, loosening the nut will decrease the handbrake's firmness and increase the lever's travel.

Watch the video!


by ScegliAuto

More videos