Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on the Mercedes-Benz B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Glow plugs

See other generations:
Video tutorial

In today's video, you will see how to replace the glow plugs in the first series of the Mercedes-Benz B-Class, specifically the W 245. First, lift the vehicle on a ramp to gain access. Locate the glow plug seats.

Loosen the glow plug supports. Then, reposition the vehicle on the ground and proceed to remove the glow plugs using the appropriate torque wrench.

Replace them with new units and reassemble the parts you have disassembled. Finally, test the vehicle to ensure it operates correctly and complete your ongoing work.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace Glow Plugs on Mercedes B-Class
How to Replace Glow Plugs on Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. Replacing the glow plugs on a Mercedes B-Class, here's how to remove them. Pull the engine compartment release lever located at the bottom left.. …
Dismantling and Fitting Glow Plugs on a Mercedes B-200
Mercedes Classe B (2005-2011 / MK 1, W245) Is your car indicating a glow plug warning light? In this video, we will see how to maintain our Mercedes B-200. Open the front bonnet of the engine …
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. replacing the cabin fan resistor on a Mercedes-Benz B-Class, as well as the A-Class. First, get inside the vehicle and unscrew the fixing screws located.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos