Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : Mercedes b-200 car glow plugs disassembly and assembly

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Glow plugs
Operation: Mercedes b-200 car glow plugs disassembly and assembly

Is our car reporting a glow plug warning light error? Let's see in this video how to do maintenance on our Mercedes B-200. We open the front hood of the engine compartment, identify where to work on the piece and equip ourselves with a socket wrench with a suitable insert, we begin to unscrew the glow plug located in the engine block as shown in the video. Once unscrewed, let's compare it with the new one, try to fit the same type of glow plug to avoid trouble. We always go with our key to screw the glow plug into the engine block, we are careful not to tighten it too much so as not to break it. We check on the instrument panel if the warning light still appears. We use the same procedure for the others.


Posted on 27 September 2023 by ScegliAuto

This video is currently unavailable

Other guides that may interest you

    Frequently Asked Questions

    • Classe B 2005-2011 - Where are the glow plugs located in the Mercedes B-Class? Read Answer
    • Classe B 2019-2026 - How much does it cost to replace the Mercedes B-Class glow plugs? Read Answer
    • Classe B 2011-2019 - Glow plug warning light on Mercedes B-Class, what does it mean? Read Answer
    • Classe B 2005-2011 - Where are the glow plugs located on Mercedes B-Class? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos