Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Cleaning instructions for window lifter button contacts

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Push button
Operation: Cleaning instructions for window lifter button contacts

The control buttons of the window lifters are located on the central tunnel, around the gear lever; to be able to disassemble them it is first necessary to remove the gear lever knob by unscrewing the ring nut at its base and then removing the frame to which the buttons are applied; then unhook the frame itself from the support of the buttons and disconnect the sockets; remove each single button from its support and clean the electronic circuit using contact spray and a brush or a toothbrush as shown in the video in order to eliminate any signs of oxidation (if possible, clean the tin soldering by applying flux gel) ; proceed backwards for reassembly.


Posted on 15 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 1993-2000 - How do you change the window regulator button in a 2000 Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos