Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Seat Disassembly Instructions

Model: Mercedes Classe C W202 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Seat

See other generations:
Video tutorial

Disassembling the front seat is very simple as you just need to access the fastening pins of the tracks to the vehicle floor; move the seat depth adjustment all the way forward to access the rear pins, then all the way back to access the front pins (in this case, remove the protective caps); then remove the side cover where the seatbelt is connected and disassemble the corresponding fastening pin; finally, move the seat from its position to access the pretensioner connector and disconnect it to complete the disassembly.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Removing Front Seat Upholstery
Removing Front Seat Upholstery
Mercedes Classe C (1993-2000 / W202) Removing the front seat upholstery of a Mercedes is very simple. This operation can be done in the car without removing the entire seat and requires …
Remove the Headrest from the Seat on Mercedes C
Remove the Headrest from the Seat on Mercedes C
Mercedes Classe C (2007-2013 / W204) Remove the headrest from the front seat of a Mercedes C? Let's go through the disassembly by removing the access panel to the backrest. Open the door…
Remove Front Seats on Mercedes C-Class
Remove Front Seats on Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) Remove the front seats from a Mercedes C-Class? Let's see how to take out the seats. Move the seat back and raise the seat cushion. Then, loosen the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos