Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights in the Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Tail light

See other generations:
Video tutorial

In this tutorial, you will see how to replace the tail lights in the Mercedes E-Class, a very simple and quick task. First, ensure that the key is not in the ignition for safety.

Then, open the trunk and remove both panels located at the back of the headlight in question. Once done, remove the indicated rubber cap, unscrew the three mounting nuts with a 8mm socket wrench, and disconnect the power connector.

At this point, you can grasp the headlight, pull it towards you, and separate it from the body. To install the replacement, simply follow the reverse procedure.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Removing the Tail Light on the Mercedes E-Class
Removing the Tail Light on the Mercedes E-Class
Mercedes Classe E (2009-2016 / W212) .. the tail light and its bulbs on the Mercedes E-Class. First, open the trunk lid and start by removing the plastic side cover; then, unscrew the tail.. …
How to Remove the Tail Lights on a Mercedes E-Class?
How to Remove the Tail Lights on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. how to remove the tail lights on a Mercedes E-Class, a very simple and quick operation. First, ensure the key is not in the ignition, then open the.. …
Where Are the Fuses Located on a Mercedes-Benz E-Class?
Where Are the Fuses Located on a Mercedes-Benz E-Class?
Mercedes Classe E (1995-2002 / W210) .. On the Mercedes-Benz E-Class, all fuses are located inside designated fuse boxes installed in the vehicle. This model has three.. …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos