Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the auxiliary battery located in the Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Battery

Video tutorial
Detailed instructions - In this video, you can see where the auxiliary battery is located in the Mercedes GLC, useful in case you need to replace it or simply recharge it. As shown, it is positioned inside the cabin, specifically under the glove compartment on the passenger side. To access it, first remove the corresponding mat and then move the protective panel. To remove it, simply disconnect the lower connector and remove the single mounting bolt. Always ensure to operate with the key removed.

Updated on 2 July 2026 by ScegliAuto


Related tutorials

Replacing the Auxiliary Battery on a Mercedes GLC 250D
Replacing the Auxiliary Battery on a Mercedes GLC 250D
Mercedes Glc (2015-2022 / C253, X253, MK 1) Let's see how to replace the auxiliary battery on a Mercedes GLC. Open the car's door and lift the floor covering to find the auxiliary battery. Once…
Where is the battery located and how to reach it in a Mercedes Glc?
Where is the battery located and how to reach it in a Mercedes Glc?
Mercedes Glc (2015-2022 / C253, X253, MK 1) The battery of our Mercedes GLC is located in the engine compartment. To reach it, we will have to open the hood. Then, we will have to remove the en…
Where is the Battery Located in the Mercedes GLC?
Where is the Battery Located in the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this video, you can see where the battery is located in the Mercedes GLC and how to proceed if you need to replace it. As shown, it is located ins…

Other guides you may be interested in

    Frequently Asked Questions

    • Glc 2015-2022 - Where is the battery located in the Mercedes GLC? Read answer

How to Reset the EDC Light on an Iveco Eurocargo

The engine light on an industrial vehicle like the Iveco Eurocargo must not be ignored. An engine fault on a heavy vehicle can cause serious damage to itself and others. After servicing, you can reset the EDC light, which is equivalent to an engine light, using the following method. Get into the vehicle, close the doors, and turn on the ignition: press the "call" button on the right side of the steering wheel once, then press the "down" button on the left side of the steering wheel twice. Now press the "menu" button on the right side of the steering wheel (below the phone button) and the "plus" button on the left side of the steering wheel. Now press "Ok" (still on the "call" button) and the light will turn off. Turn off the ignition and turn it back on to verify.

Watch the video!


by ScegliAuto

More videos