Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment in the Mercedes GLC?

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Glove compartment

Removing the glove compartment in the Mercedes GLC, as shown in this tutorial, is an extremely simple and quick operation. First, go to the passenger side, then open the glove compartment and empty it. Next, disengage the side panel of the dashboard by prying with a plastic spatula, unclip the lower cover, and remove all the indicated mounting screws using a Torx T20 wrench. At this point, simply separate the glove compartment from the dashboard, insert any replacement part, and reinstall it by following the reverse procedure.

Updated on 22 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front door panel in the Mercedes GLC?
How to disassemble the front door panel in the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this tutorial we can see how to disassemble the front door panel in the Mercedes GLC, an extremely simple and quick operation. First of all, we op…
Where are the fuses located in the Mercedes GLC?
Where are the fuses located in the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) On board the Mercedes GLC, the fuses are distributed inside the appropriate fuse boxes that are installed on the vehicle: in this type of car it will…
How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos