Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Center Tunnel of the Mercedes GLC Class

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Dashboard

To remove the trim and frames of the center console on this vehicle, follow these instructions and check the video. Sit in the driver's seat and use a plastic trim tool to pry upwards on the profile located between the console and the automatic opening cover. Under this trim, there are screws that need to be removed. After doing this, you can lift the entire center console assembly by pulling it upwards and towards yourself. Be careful of the electrical connectors at the back that will need to be disconnected.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Refill the Coolant in the Mercedes GLC Class?
Where to Refill the Coolant in the Mercedes GLC Class?
Mercedes Glc (2022-2026 / C254, X254, MK 2) Periodically check the coolant level and top it off to prevent the engine from overheating, which can cause serious damage and lead to costly repairs…
How to remove the center console of the Mercedes GLC
How to remove the center console of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Today we will explain how to remove the center console of the Mercedes GLC. To remove it you will need to use a plastic lever, a star screwdriver, an…
How to set the date and time on the Mercedes GLC
How to set the date and time on the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Today we will discover the instructions that will allow us to change the date and time of the Mercedes GLC, in simple and quick steps. First of all, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos