Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Mercedes GLC Radio?

Model: Mercedes Glc C253, X253, MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
This video is currently unavailable

If the Mercedes GLC radio is frozen and you cannot give commands, you need to unlock it by performing a soft reset. To perform the soft reset, press the buttons located on the center console.

Specifically, you need to hold down the button with the star and the one labeled TEL for a few seconds. By holding them down for about ten seconds, the radio will undergo a soft reset and unlock, allowing you to use it. After the reset, you can turn off and turn on the instrument cluster; this procedure can be repeated whenever the screen freezes.


Updated on 30 April 2026 by ScegliAuto


Related tutorials

How do you reset the radio of the Mercedes Benz GLC 300?
How do you reset the radio of the Mercedes Benz GLC 300?
Mercedes Glc (2022-2026 / X254, C254, MK 2) The operation that we are going to describe below becomes important when the functions of the car radio, and not only, are impossible to perform due,…
How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / X254, C254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
How do you reset the Service light on the Mercedes GLC?
How do you reset the Service light on the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, X253, MK 1) To reset the Service light of the Mercedes GLC, you will need to turn on the instrument panel by inserting the ignition key into the corresponding sl…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos