Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to disassemble the wiper motor in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Windscreen wipers
Operation: How to disassemble the wiper motor in the Mercedes C-Class?

In this tutorial we can see how to disassemble the wiper motor in the Mercedes C-Class W202. First of all, in order to operate in safety, let's make sure that the key is not inserted, then open the bonnet and disengage the plastic strip located at the base of the wiper arms. Next, we open the fuse box, unscrew the screws located around the perimeter and, after removing the frame, disconnect the indicated connector. At this point, remove the arm covers, remove any plastic cover and disassemble the entire mechanism, in which we will later replace the motor.


Posted on 30 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What to do when the windshield wiper of the Mercedes C-Class is not working? Read Answer
    • Classe C 2014-2021 - What is the windshield fuse on Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos