Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Control Arm of the Mercedes 124

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Control arm

See other generations:
Video tutorial

Replacing the control arm on the Mercedes E-Class is not a difficult task, especially if you are already familiar with cars. Additionally, with the help of our video tutorial, you will learn how to do it independently.

Start by lifting the car and removing the tire. Use WD-40 spray and a wire brush to clean the control arm bolt, then remove it. At this point, take out the control arm and clean the housing before inserting the new one. Insert the new control arm and install the bolt you removed earlier.

Reinstall the tire and tighten it. This procedure is the same for all four wheels.


Updated on 24 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (1984-1995 / W124) To replace the control arm on the Mercedes E-Class, W124, first remove the wheel. Loosen the bolts, then lift the car to completely remove the wheel.…
Mercedes Classe E (1984-1995 / W124) This video tutorial shows the location of the fuse boxes for the Mercedes E-Class 124 and details the assignment of each fuse along with its amperage…
Mercedes Classe E (1984-1995 / W124) Lift the vehicle at the wheel where the repair will be made until the tire slightly lifts off the ground: it is not necessary to remove the wheel (fo…

Other guides you may be interested in

How to Open the Fuel Door of the MG ZS?

To open the fuel door of the MG ZS, access the interior of the vehicle to locate the lever that unlocks the fuel door. This lever is located on the lower left side of the dashboard, near the steering column. Pull the lever to open the fuel door, allowing you to unscrew the cap underneath for refueling. After refueling, replace the fuel cap and securely close the fuel door.

Watch the video!


by ScegliAuto

More videos