Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service on the Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Warning light – error code

See other generations:
Video tutorial

If you change the engine oil on your vehicle, you must complete the job by resetting the service light on the instrument cluster. Follow the instructions and steps outlined below to perform this operation, and you can also refer to the images in the tutorial video: Position the key in position 1. Then view the total mileage.

Press the call button and, while holding it down, press the Ok button. Release after 3 seconds.

From the maintenance menu, select Maintenance 2 or 3 and then select General Maintenance. Confirm with Ok.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe B (2011-2019 / MK 2, W246) .. To reset the Service light on a Mercedes-Benz B-Class, turn on the ignition by rotating the key in the ignition switch. Once the dashboard lights.. …
Mercedes Classe B (2011-2019 / MK 2, W246) .. to reset the Service light on the Mercedes-Benz B-Class can be done by turning on the instrument cluster. Use the arrows on the side spokes of the.. …
Mercedes Classe B (2011-2019 / MK 2, W246) .. routine maintenance oil change on the Mercedes-Benz B-Class. First, get inside the vehicle and turn on the ignition; scroll through the buttons on the.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos