Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Filter on a Mercedes-Benz B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Engine oil

See other generations:
Video tutorial

To change the engine oil and filter on a Mercedes-Benz B-Class, start the engine for a few minutes to slightly warm the lubricant, then turn off the vehicle and lift it safely. Place a container under the oil sump and unscrew the lower plug to allow the old oil to drain completely.

Next, open the oil filter housing located in the engine bay and remove the used cartridge. Before fitting the new filter, replace the cover gasket and lubricate it with a bit of clean oil. After closing the filter, re-screw the sump drain plug and pour the new oil from the upper filler neck in the correct quantity.

Finally, start the engine, check for leaks, and verify the oil level, adding more if necessary.


Posted on 20 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Filter in a Mercedes B-Class
How to Change the Engine Oil and Filter in a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the engine oil and filter in a Mercedes B-Class, it is advisable to bring the engine to operating temperature, then turn it off and safely lift.. …
Engine Oil Change on Mercedes Class B
Engine Oil Change on Mercedes Class B
Mercedes Classe B (2005-2011 / MK 1, W245) .. Perform maintenance on your Mercedes Class B by changing the engine oil and the corresponding filter. Lift your car on a column lift or jack.. …
Cabin Air Filter Replacement on Mercedes Classe B W245
Cabin Air Filter Replacement on Mercedes Classe B W245
Mercedes Classe B (2005-2011 / MK 1, W245) .. air filter or pollen filter on a Mercedes Benz Classe B W245. First, open the engine bonnet and remove the air filter cover located under the plastic.. …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos