Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Mercedes B-Class

Model: Mercedes Classe B MK 2, W246 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Replacing the engine oil and oil filter on a 2017 Mercedes B-Class involves simple and quick steps that you can perform independently. Start by opening the bonnet and removing the engine cover, under which the oil filter is located.

Once the filter is exposed, use a hex key to clean and insert the new filter. Close the filter cap and open the oil filler cap. Continue the replacement by lifting the vehicle; using a jack will facilitate the oil drainage.

Remove the oil sump plug and allow the liquid to drain out. Close the sump plug and lower the vehicle. Complete the replacement by topping up the oil in the reservoir.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Mercedes Class B
Engine Oil Change on Mercedes Class B
Mercedes Classe B (2005-2011 / MK 1, W245) .. Perform maintenance on your Mercedes Class B by changing the engine oil and the corresponding filter. Lift your car on a column lift or jack.. …
How to Change the Engine Oil and Filter in a Mercedes B-Class
How to Change the Engine Oil and Filter in a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the engine oil and filter in a Mercedes B-Class, it is advisable to bring the engine to operating temperature, then turn it off and safely lift.. …
How to Change the Engine Oil and Filter on a Mercedes-Benz B-Class
How to Change the Engine Oil and Filter on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. the engine oil and filter on a Mercedes-Benz B-Class, start the engine for a few minutes to slightly warm the lubricant, then turn off the vehicle and.. …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos