Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to replace the oil filter in the Mercedes B-Class?

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Oil filter
Operation: How to replace the oil filter in the Mercedes B-Class?

In this tutorial we can see how to replace the oil filter in the Mercedes B-Class, a very simple and fast operation. We start by lifting the car on a bridge or with a jack, taking all the necessary precautions, then we drain all the oil by unscrewing the appropriate bolt. Next, we locate the filter located in the rear part of the engine, apply some unlocking spray and unscrew the cap with a 27mm socket wrench. Finally, we extract the filter from the housing, insert the replacement together with a new gasket and reassemble everything following the reverse procedure.


Posted on 26 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Classe B 2019-2026 - What is the position of the oil filter on the Mercedes B200? Read Answer
    • Classe B 2019-2026 - Where is the engine oil filter located in the Mercedes B-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos