Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery in a Mercedes E-Class W213

Model: Mercedes Classe E W213 - Years 2016-2023
Part: Battery

To replace the battery in a Mercedes E-Class W213, open the hood using the lever in the passenger compartment. Remove the plastic cover over the battery by disengaging the plastic clips. Take out the air filter by releasing the tabs on the side. Unscrew the nuts from the battery terminals and disconnect them from the battery. Unscrew the bolt at the bottom that holds the battery in place and remove the battery. After removing the old battery (the video also tests the battery charge with a tester), install the new one and reassemble everything by reversing the disassembly procedure.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe E (2016-2023 / W213) .. box containing all the fuses of your Mercedes E-Class W213 is really very simple and you just need to follow the steps described in the following guide.. …
Mercedes Classe E (2016-2023 / W213) .. the main fuse box is located in your Mercedes E-Class W213 (model years 2016-2022). Before proceeding, remember that the vehicle must remain completely.. …
Mercedes Classe E (2016-2023 / W213) To perform the battery replacement in a Mercedes E-Class, first, open the hood. The battery is located in the upper left area. After removing the pla…

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer
    • Classe E 2016-2023 - Where is the battery of a Mercedes E-Class located? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos