Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : Removing the front hood closure

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Grille
Operation: Removing the front hood closure

If you have to remove the front hood closing mechanism, first open the hood using the lever located at the bottom left of the passenger compartment: once the lever is pulled, the lock opens, the hood makes a first click to open and a tab protrudes from the grille of the matte which must be pulled out to completely unhook the bonnet and therefore be able to open it completely; at this point it is simply a matter of unscrewing the two nuts that secure the bonnet closing support plate to the bonnet to complete disassembly.


Posted on 4 September 2023 by ScegliAuto



Removing the front bumper on Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) We want to replace the front bumper of the Mercedes E why damaged? Let's see how it disassembles. We raise the bonnet and put it in safety, we lift t
How to open the engine hood of the Mercedes E-Class.
Mercedes Classe E (2009-2016 / W212) Let's see in this short guide, the instructions that will allow us to open the engine hood of the Mercedes E-Class. First, we open the front door on
Front hood opening in maintenance position
Mercedes Classe E (2002-2009 / W211) If maintenance is to be carried out in the engine compartment, the designers have seen fit to ensure the greatest possible maneuvering space: in fact

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos