Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Battery on a Mercedes E-Class?

Model: Mercedes Classe E W212 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

See other generations:
Video tutorial

If you need to replace the battery on this vehicle, refer to the instructions below and you can also use the video tutorial. The first step is to open the hood; the battery is located at the top, just under the windshield on the right side.

To facilitate removal, disengage the hood's stop limit pins to fully tilt it back. The compartment containing the battery is covered with a plastic lid, and to open it, you need to unclip some steel clamps.

Underneath, you will find the battery housing. Disconnect the negative terminal first, then the positive terminal.

Next, remove the nut at the base of the battery to take off the mounting plate. After that, you can pull out the battery and replace it with the new one.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Mercedes Classe E (2009-2016 / W212) .. ensure safety by positioning your Mercedes E-Class on a lift or flat surface. Next, open the hood and locate the battery housing, which is situated.. …
Mercedes Classe E (2016-2023 / W213) .. To replace the battery in a Mercedes E-Class, open the hood to access the components in the engine compartment. Here, in the upper right corner,.. …
Mercedes Classe E (2009-2016 / W212) .. To replace the battery in a Mercedes E-Class, open the hood to access the components inside the engine compartment: here you will find a cover.. …

    Frequently Asked Questions

    • Classe E 2009-2016 - Where is the battery of the Mercedes E-Class located? Read answer
    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos