Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement in the Mercedes E-Class

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Battery

For any maintenance work on cars, ensure safety by positioning your Mercedes E-Class on a lift or flat surface. Next, open the hood and locate the battery housing, which is situated at the top left of the engine compartment. Remove the battery cover to access the battery. Disconnect all cables and connections, and remove the bolt that secures the battery in place, allowing you to take out the old battery. Install the new battery and reassemble everything by reversing the steps taken.

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the auxiliary battery of the Mercedes E-Class?
How do you replace the auxiliary battery of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. of the auxiliary battery on the Mercedes E-Class is done by opening the rear hatch, so that access to the components in the trunk area can be obtained:.. …
How to Replace the Battery in a Mercedes E-Class
How to Replace the Battery in a Mercedes E-Class
Mercedes Classe E (2016-2023 / W213) .. perform the battery replacement in a Mercedes E-Class, first, open the hood. The battery is located in the upper left area. After removing the plastic.. …
How to Replace the Battery in a Mercedes E-Class?
How to Replace the Battery in a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the battery in a Mercedes E-Class, open the hood to access the components in the engine compartment. In the upper right section,.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe E 2016-2023 - Where is the auxiliary battery of the Mercedes Benz E-Class W213 located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos