Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix the Curved Bodywork or Interior Trim

Model: Mercedes Classe M W163 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Body

See other generations:
Video tutorial

Take the curved bodywork piece and remove the adhesive cover from the area to be fixed. Get a can of spray adhesive (read the instructions and specifications on the can carefully) suitable for the conditions the car may be in: for example, water-resistant, strong hold, etc. After shaking it, spray the adhesive on the piece to be glued and let it dry for a few minutes.

After this time, you can adhere the adhesive protection to the bodywork piece to avoid creases or bubbles. The car is a Mercedes M-Class.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Remove the Chrome Trim from the Windows of a Mercedes
How to Remove the Chrome Trim from the Windows of a Mercedes
Mercedes Classe M (2005-2011 / W164) Removing the chrome trim from the windows of a 2010 Mercedes-Benz M-Class is a simple and useful task to perform if you need to replace the window se…
Instructions for Replacing the Front Wing
Instructions for Replacing the Front Wing
Mercedes Classe M (1997-2005 / W163) Often, if the dents have severely deformed the bodywork, it is not advisable to try to straighten and fill but rather to replace the component. To re…
Replacing the Pillar Trim in Your Car
Replacing the Pillar Trim in Your Car
Mercedes Classe M (1997-2005 / W163) The video shows how to replace a piece of the interior pillar in your car by yourself. It is not a very difficult procedure to perform, although it c…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos