Do it yourself
Frequently asked questions about cars and motorcycles

How to restore the service indicator on the Mercedes ML W164.

Model: Mercedes Classe M W164 - Years 2005-2011
Part: Service Light

In this video, we can see how to reset the maintenance light on the Mercedes ML W164. The procedure is very simple and quick to perform. First, we need to start the instrument cluster and then turn it off. After that, press the R button three times located at the top center of the cluster. At this point, the menu will open. Using the buttons on the left side of the steering wheel, scroll through the menu until you find the maintenance section. Once you have found the maintenance section, use the - button located on the right side of the steering wheel to navigate to the confirmation option. Press the button on the left side of the steering wheel, as indicated in the video, to confirm. Confirm again to complete the reset. At this point, you can restart the instrument cluster to verify that the procedure has been completed correctly and the maintenance light is no longer present on the instrument cluster.


Posted on 14 September 2023 by ScegliAuto



How to restore the service indicator on the Mercedes ML
Mercedes Classe M (2005-2011 / W164) In this video we see how to reset the service on the Mercedes ML350, regardless of the type of service, whether it is service A, B or C. We get in th
How do you reset the Service indicator light on the Mercedes M-Class?
Mercedes Classe M (2005-2011 / W164) To reset the Service indicator light of the Mercedes M-Class, you need to turn on the instrument panel by inserting the ignition key into its slot: o
How to reset the service of the Mercedes Class M W164
Mercedes Classe M (2005-2011 / W164) In this video we can see how to reset the service light of a Mercedes Class M W164: make sure that the hood, trunk, and doors are properly closed, tu

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos