Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Climate Control Console in a Mercedes C-Class?

Model: Mercedes Classe C W204 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: A/C controls

See other generations:
Video tutorial

In this tutorial, you will see how to replace the climate control console in a Mercedes C-Class, a very simple and quick operation. First, ensure that the key is not in the ignition for safety.

Next, detach the upper center trim that contains the air vents. Then, remove the indicated screws using a Torx screwdriver, pull the radio module out of the dashboard, and continue unscrewing the additional mounting screws.

At this point, simply remove the climate control console from its housing, disconnect the connector, and install the replacement by following the reverse procedure.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (1993-2000 / W202) .. the automatic climate control in the Mercedes C-Class. First, get in the vehicle and turn on the instrument panel and the engine; then press and hold.. …
Mercedes Classe C (2000-2007 / W203) .. the climate control buttons from a Mercedes C-Class, detach the plastic cover from the front of the center console, which surrounds the gear shift.. …
Mercedes Classe C (1993-2000 / W202) .. the automatic climate control of the Mercedes C-Class. First, get in the vehicle and turn on the instrument panel; then turn on the automatic climate.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos