|
Do it yourself
| |||
| ||||
The reason why the convertible roof of a Mercedes SLK may not function properly
Model: Mercedes Slk
MK 2, R171
- Years 2004-2011
This video explains the main reason why the convertible roof of a Mercedes SLK may not function correctly. It is crucial to check the oil level of the hydraulic pump. In the case shown in the video, there is insufficient oil for the pump to operate properly, and a top-up is required. Removing the motor unit is quite simple, allowing access to the filling screw. This operation should be done with a syringe specifically designed for this type of pump. To check if the level has been reached, reposition the hydraulic motor in its place. Remember to close the bleed screw! Test the roof's operation with a complete open/close cycle; this indicates that the oil level is correct. The video specifies the correct torque for all screws in Nm.
Updated on 21 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Mercedes Slk
(2004-2011 /
MK 2, R171)
In this video we can see the features of a module that allows you to control the opening and closing of the sunroof of the Mercedes SLK R171 using th…
Mercedes Slk
(2011-2016 /
MK 3, R172)
The sunroof of a Mercedes SLK can be opened from both the outside and inside of the vehicle. To open the sunroof from inside the vehicle, you will ne…
Mercedes Slk
(2011-2016 /
MK 3, R172)
If the remote control of our Mercedes SLK has suddenly stopped working, it is very likely that the related battery is completely discharged and there…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.540
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |