Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Mercedes A-Class?

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Service warning light

To reset the Service light on a Mercedes A-Class, turn the ignition key to the first position to power on the instrument cluster. Then, press and hold the OK button and the call answer button located on the side spokes of the steering wheel for about three seconds. A screen will appear where you can select "ASSYST PLUS" until you reach general maintenance; this will bring up another screen where you can select the Service reset, turning off the light.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Mercedes A-Class
How to reset the service light on the Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. of the engine oil change for the Mercedes Class A, as well as the Class B. First, let's get into the car and start the instrument panel; then let's.. …
How to Reset the Maintenance Light on a Mercedes A-Class W169
How to Reset the Maintenance Light on a Mercedes A-Class W169
Mercedes Classe A (2004-2012 / W169) .. light for the engine oil change on a Mercedes A-Class W169. First, get inside the vehicle and turn on the ignition; now access the onboard computer menu.. …
How to Reset the Service Light on a Mercedes A-Class W176
How to Reset the Service Light on a Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) .. maintenance of the oil change on a Mercedes A-Class W176. First, get in the vehicle and turn the key to the first position; then press and hold the.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos