Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How to remove the headliner of the Mercedes E-Class

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Bodywork
Operation: How to remove the headliner of the Mercedes E-Class

It frequently happens that the action of the heat on the car roof causes the lining fabric of the interior headliner to come off: it is possible to restore this lining but the headlining must be removed and extracted from inside the passenger compartment; the disassembly of the roof actually requires a lot of care and attention since many covering elements have to be removed in order to unhook it and then extract it; you start with the disassembly of the interior lights and then move on to the lining of the windscreen pillars, the doors and the rear ones, also removing the handles; once the roof has been freed, it must be rotated to be able to extract it through the rear door: in this phase it is necessary to be very careful not to make it deform or break.


Posted on 15 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe E 2002-2009 - Where is the central locking pump of the Mercedes E-Class W210 housed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos