Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : Resetting the engine malfunction warning light of the Mercedes S-Class.

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S MK 4, W220 - Years 1999-2005
Part: Checks and maintenance
Operation: Resetting the engine malfunction warning light of the Mercedes S-Class.

Today's necessary instructions will show us how to proceed with resetting the engine malfunction indicator light of the Mercedes S-Class, in simple steps. First, we get into the car and start connecting our diagnostic tool to the car's OBD port. Before performing the reset operation, it is necessary to have resolved the issue related to the light's activation. Then, we turn on the instrument panel and follow the diagnostic tool's guided procedure to confirm and execute the service reset, following the video tutorial until the end!


Posted on 5 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe S 2013-2020 - Where is the list of fuses of the Mercedes S-Class W222? Read Answer
    • Classe S 2005-2013 - How to open the fuel flap of the Mercedes S-Class? Read Answer
    • Classe S 2013-2020 - How much does a b5 maintenance cost on a Mercedes? Read Answer
    • Classe S 1999-2005 - What are the warning lights of the Mercedes S-Class W220? Read Answer
    • Classe S 1999-2005 - What do the yellow warning lights on the Mercedes S-Class mean? Read Answer
    • Classe S 1999-2005 - What does the yellow battery light on the Mercedes S-Class mean? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos