Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Mercedes C220

Model: Mercedes Classe C W205 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

See other generations:
Video tutorial

This video shows how to perform the reset procedure for the service light on the Mercedes C-Class. It is recommended to carry out this procedure only after completing the maintenance service on the vehicle.

To perform this procedure, start the instrument cluster, then press the return button and the center button for 5 seconds. After these 5 seconds, the menu will appear on the instrument cluster.

Use the center button to scroll to the 'Assyst Plus' option, once found, select it, then choose 'Full Service'. Now you need to confirm the full service, at this point select the type of oil used. Once the type of oil is selected, confirm it. Once confirmed, the maintenance light will be reset.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2014-2021 / W205) To reset the maintenance light on a Mercedes C220 W205, the procedure is performed from the steering wheel, with the ignition in position 1. The airb…
Mercedes Classe C (2007-2013 / W204) If you are looking for the fuse box of the engine of your Mercedes C220, just read the following guide carefully so that you can apply step by step a…
Mercedes Classe C (2007-2013 / W204) Today, you will learn how to reset the maintenance light on the Mercedes C220 W204. This procedure takes little time and does not require any tools o…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to adjust the headlights in the Toyota RAV4?

In this tutorial, you can see how to adjust the headlights in the Toyota RAV4, a very simple and quick operation. First, position the vehicle in front of a wall, about 40 centimetres away, then switch on the headlights and open the bonnet. Next, locate the small hole on both headlamps, apply tape on the wall at the same height, and using the indicated adjustment ring, position the beam of light so that it is perpendicular to the tape. Finally, move the vehicle back and check that the beam falls below the tape; if not, lower it slightly.

Watch the video!


by ScegliAuto

More videos